Arctic Metalworks is the leading provider and manufacturer of commercial grade quality wine cellar refrigeration systems in Southern California. They offer a complete line of wine cellar cooling systems California, that are specially designed to address the cooling needs and requirements of various applications, from residential wine cellars to commercial wine displays.
Wine cellar cooling systems are crucial to achieving and maintaining a proper wine storage environment. Climate control systems are engineered to help regulate temperature and humidity levels within 50 to 55 degrees Fahrenheit and 60 to 75 percent, respectively. Stable climate conditions are necessary, in order for wines to reach their aging potential.
Arctic Metalworks Wine Cellar Refrigeration Expert
Arctic Metalworks designs and builds custom wine cellar refrigeration units that can accommodate the temperature and humidity requirements of a wine storage space. Their refrigeration systems provide the optimum cooling capacity, which ensures the proper preservation of wines for a prolonged period of time.
They have completed numerous wine cellar cooling installation projects in Southern California. Some of these projects involve replacing existing refrigeration equipment, and/or providing a remedy to inadequately designed and built custom wine rooms. The following refrigeration installation projects will shed light on the intricacies involved in wine cellar construction, and on the importance of wine cellar cooling systems California.
Wine Cellar Cooling Systems Installation in Laguna Beach California
Wine Cellar Cooling Systems
One of their recently completed wine cellar cooling installation California projects took place at Laguna Beach. The project involved replacing the existing LRC evaporator coil with an Arctic 0025 ¼ hp evaporator coil, and upgrading the wine cellar refrigeration system’s small chap pump to an air conditioner condensate pump.
The Arctic team decided to retain the condensing unit, which was not only in good condition, but also operating with an R-134a refrigerant (a green gas alternative). Arctic Metalworks would have replaced the entire refrigeration unit if it had functioned off of an R-22 refrigerant, AKA an ozone depleting substance. A special enclosure was designed and constructed by Jerry from Coastal Custom Wine Cellars, to conceal the cooling unit from sight.
This Manhattan Beach wine cellar cooling installation project shows the importance of locating a condensing unit in a well-ventilated area. The contractor was concerned about placing the cooling system in the yard because of the noise it generated, so they had it installed in a mechanical room, and the Arctic team replaced the existing 4’ ventilation fan with a bigger exhaust fan to help heat dissipate.
The lack of proper ventilation caused the refrigeration unit to perform poorly and inefficiently. So, Arctic Metalworks relocated the condensing unit to the side yard, to keep it properly ventilated, and thus provide optimum cooling performance.
San Clemente California Wine Cellar Cooling Installation Project
Wine Cellar Cooling Installation
As Southern California’s refrigeration gurus, it is not unusual for Arctic Metalworks to take on a project that involves rectifying an improperly constructed wine cellar. For the San Clemente wine cellar cooling installation California project, Arctic Metalworks had to completely tear down the ceiling drywall and apply polyurethane foam, a sealing agent that acts as insulation and vapor barrier.
The original building contractor failed to install vapor barriers around the entire building envelope, which eventually led to drywall damage caused by water leaks. A vapor barrier is an important component of wine cellar construction, as it provides better moisture control.
The Arctic team re-applied drywall and paint, and upgraded the underpowered wine cellar refrigeration unit with an Arctic 5500 split system. The evaporator unit was mounted on the wall, while the condensing unit was located remotely, for ultra-quiet and efficient cooling of the San Clemente residential wine cellar.
Wine Cellar Refrigeration Unit Installation in Corona del Mar, CA
Wine Cellar Cooling Systems Installation
A remedial wine cellar cooling systems project was also done for Motocross superstar Ryan Villapoto, in Corona del Mar, California. The existing wine cellar underwent a major overhaul, courtesy of Arctic Metalworks. The original contractor installed the vapor barrier on the wrong side of the wall, and placed the condensing unit in an enclosed space, which led to the compressor overheating.
The Arctic team took down the wall, applied polyurethane foam insulation, and re-applied the vapor barrier with Italian plaster finish. The condensing unit was moved to the yard, and housed in an A/C style vent to protect it from harmful external factors.
Arctic Metalworks also installed a digital temperature control, to allow easy monitoring of the temperature and humidity inside the wine room.
Aliso Viejo Wine Cellar Cooling Installation in California
Another wine cellar cooling installation California project that involved the replacement of existing wine cellar cooling systems California was the Aliso Viejo residential wine room. The original refrigeration installation team installed a refrigeration system that did not meet the cooling requirements of the wine storage space.
The Arctic team ran diagnostics, and found out that the original cooling system did not have the capacity to maintain the ideal climate conditions for storing and aging wines. Arctic Metalworks replaced the unit with an Arctic 0025 split system.
The evaporator unit was located inside the wine room, and the condensing unit was placed in the yard. To protect the condensing unit from outside elements, it was encased in a custom designed protective housing.
Wine Cellar Cooling Installation California
Split wine cellar cooling systems are considered the best cooling solution for achieving optimum storage conditions. The evaporator and condenser are housed separately, which provides flexibility in installation options, and promotes efficient operation. The evaporator unit and condensing unit are connected by a line set or air ducts.
There is more to Arctic Metalworks than just wine cellar cooling installation. The Arctic teams also carries out the full installation of custom wine cellars, as well as provides quality handmade wine storage and display solutions.
They recently completed a custom wine cellar construction and refrigeration installation project for the former South African tennis player Ray Moore.
The Arctic team installed custom designed wine racking systems to store over a thousand wine bottles. Additional custom drawers were also provided, to hold his rarest and most valuable vintages. All wine racks were made from unfinished black walnut wood.
To achieve and maintain the ideal wine storage conditions, Arctic Metalworks supplied an Arctic 0500 split system. The condensing unit was placed in a 5-car garage, which was large enough to contain heat exhaust without overheating the compressor. The Arctic team utilized an existing 50’ line set that was already installed during the construction of the home.
Arctic Metalworks offers their clients a comprehensive wine cellar cooling system maintenance plan, which includes checking and cleaning the cooling system and lubricating the motor. They also provide a warranty on all parts and labor.